How To Change The Password Of The Netgear N600 Router?

How To Change The Password Of The Netgear N600 Router?

netgear service number netgear support number

Change Password of Netgear N600 Router

When you set up your Netgear N600 router, at first time, it comes with a default username and password that is used to access the router. You can use these details to access the administration panel of router via any of the web browsers or any system which is connected to the network. If you are managing a network along with a number of people connecting to the router, it could be a potential problem, because the Netgear N600 router always has the default username and password are admin and password in that order.

If you want to change the router password to make it protected, but the method to make this change is not obvious for you. This is the case, when you should contact with the expert by dialing Netgear Service Number in order to get the best possible assistance. Yet, there are some easy guide help you to change the password abruptly.

It is necessary to note that the router password and the wireless network password are two different things. If you want to change the router password, then you should change the router setting. Instructions are:

• Launch the web browser on your system which is connected to the network, whether it is wired or wireless internet connection. You can also make this change with your mobile device, including tablet or Smartphone.
• Enter the ‘192,168.1.1’ into the address bar placed in the top of the browser window and then hit ‘Enter’ on your keyboard.
• Enter the current username and password into their related fields, and then hit on the ‘Log In’ button. The exact screen will seem a little different depending upon the browser type.
• Hit on the grayed-out ‘Advanced’ tab located at the top of the window.
• Click on the ‘Administration’ tab placed at the pane left side, and then hit the ‘Set Password’ option.
• Enter the old password into the ‘Old Password’ column, and then enter the new password into both columns labeled as the ‘Set Password’ and ‘Repeat New Password’.
• Hit on the ‘Apply’ button to set the new password.

These are the simple set of instructions and helpful for everyone, even if you have a less technical knowledge about the router. However, if you may experience any of technical hitches, it is suggested to make a direct call to the expert by calling on the Netgear Support Number in order to get immediate resolution of your query. As well, you can reach on the directory available online such as Contactforservice to discover new contact number in case the previously dialed number is not reachable.

Unknown Pada 5:17 AM Komentar

Replace Ink Cartridge For Canon Pixma MX300 Printer

Replace Ink Cartridge For Canon Pixma MX300 Printer

canon printer customer service number canon printer support number

The Canon Pixma MX300 printer is a multifunction device used for color and black-and-white printing, copying, scanning and faxing. In order to print various text documents, the main component is using the Canon FINE cartridge system that includes one color ink cartridge and one black ink cartridge. If the cartridge runs out of ink, then you can change it separately. When a cartridge is close to blank, the printer indicates you by displaying a lower level alert.

If you are going to change your empty cartridge, then you need to remove it carefully and follow up the step by step instructions. However, if you have less information about printer, it is advisable to contact on the Canon Printer Customer Service Number to get help from an expert. In case, if you want to try on your own, the following sets of instructions help you to replace the ink cartridge for a Canon Pixma MX300 printer properly.

• Start your printer, and let it to execute the self-test.
• Pull up the printer cover and strut it open with the support placed on the printer cover right-side. Pulling the cover will move the empty cartridges quickly to the center this you can take out them easily.
• Push down on the ink cartridge front edge you want to change to separate it from the holder. Extract the cartridge out.
• Take out the new FINE cartridge from its package, but be careful and don’t touch the contacts. Extract the orange tape strip from the cartridge bottom side.
• Put the cartridge in the holder, and slot the rear bottom frame at first. Pull the ink cartridge front bottom frame to lock it into put in the holder.
• Pull the top cover to free from the support. Fold it rear into place and lock the cover. The Cartridge will move automatically to the ready position and execute a cleaning cycle.
• Once the cleaning is finished, you can take a test print to check that it is replaced correctly.

Now, you can run your printer without having any issues related to the printer ink cartridges. However, if you stuck or fail to execute the process properly, you can contact Canon Printer Support Number to get solution from the expert. As well, you can also reach the directory over the web, such as ContactforService to locate direct customer support number for resolving your issues instantly.

Unknown Pada 4:29 AM Komentar

How to Install RAM on a Gateway Laptop?

How to Install RAM on a Gateway Laptop?

Gateway customer service phone number Gateway Laptop Support

Gateway laptop is one of the most popular computing devices used for both personal and professional purposes. If you frequently want to use system-intensive software programs on the laptop regularly, you may see that you need to improve your system performance by installing extra RAM. The process of RAM installation is quite easy and user-serviceable; it doesn’t require special technical knowledge or advanced tools.

The following sets of instructions help you to install the RAM successfully, even if you have little technical knowledge. In case of any query or circumstance, feel free to get in touch with the Gateway Laptop Support service. Steps are:

• Firstly, close all the currently running application and turn off your laptop and close the display. Disconnect the power cord and unplug any other connected cables. Get rid of any installed memory cards or Express.
• Rotate the laptop and search the battery bay near the back frame of the device. Slide the battery locking switch to unlock the point. Slide the battery release key and hold it when you take out the battery from the battery bay.
• Search the memory bay cover. Release the screws locking the memory bay cover in its place. Find the indentation placed beside to the memory cover, add the tilt of your thumb into the indentation and pull the laptop memory bay cover off.
• Search the blank memory connector for your RAM module. If required, free up a connector by extracting an installed module.
• Add the new RAM module into the connector at a slight angle. Push it until the module is placed in the connector fully. Press down until the metal clips snap into location.
• Change the memory bay cover and secure it to the laptop base by tightening the screws.
• Reinsert the battery into the bay and lock it by sliding the battery latch. Rotate the laptop upright.
• Connect the power cord and other earlier removed cables. Now, the process is complete.

These are the easiest ways help you to install the RAM in your Gateway laptop successfully, however, if you may experience any of the issues, feel free to call on the Gateway Customer Service Phone Number to get your query to be resolved via expert. In case, if you don’t want to wait for a long time, avail the directory as ContactforSerivce, providing an instant customer care number of the Gateway experts.

Source: 

https://contactforservice.wordpress.com/2016/05/24/install-ram-on-gateway-laptop/

Unknown Pada 3:02 AM Komentar

A Complete Guide to Clean your HP Printer Rollers

A Complete Guide to Clean your HP Printer Rollers

hewlett-packard customer service number support for hp printer

Paper dust and other debris on the printer rollers may be the reason of the documents you print seem wrinkled and unprofessional. If you don’t clean your printer time to time, it may cause the paper jam issues during printing letters, invoices and other text documents. In order to keep your printer in good functioning order, it is necessary to wipe your HP printer’s rollers regularly by using a safe method that doesn’t harm the rollers’ rubber.
Cleaning of the rollers and the printer properly will help to work the printer accurately every time when you use it. In case, the printer is not taking the paper or it gets stuck in the rollers, this is the time to clean it. The following easy-to-use instructions help you to clean the rollers correctly without taking customer Support for HP Printer.

• Turn your HP printer off and disconnect its power cord from the from the power source.
• Take out the paper from the paper trays of your printer and search the printer rollers inside it.
• Lift the printer’s cover to explore the rollers and other inside components of the device. It depends on your model you have; you should remove the paper ‘Out’ tray to get access to the rollers.
• Wet a microfiber cloth lightly among water, crinkling out the entire excess wetness from the cloth.
• Clean the rollers using a dry and microfiber cloth to remove remaining dust.
• Allow the rollers to dry properly before sliding the paper tray back into your HP printer and closing the printer cover.
• Connect the power cord and the turn your printer on.
• Take a test print to check that your HP printer is functioning properly.

Now, you will be able to print your text documents correctly, however, if you have any kind of the problems regarding the rollers cleaning. It is advisable to address your query with the technicians by calling on the Hewlett-Packard customer service number. In case, if the dialed number is not responding or you are unable to get a response from a human being, simply avail the directories as ContactforService over the web, to get an instant query response from the HP expert.

Unknown Pada 4:24 AM 5 Komentar

Install a Netgear Wireless Router without using CD/DVD!

Install a Netgear Wireless Router without using CD/DVD!

Netgear Customer Support Number Netgear Router

Netgear is one of the most famous manufacturers of wireless routers worldwide. The wireless router is mainly used to access the internet on your computers and other devices of the home or office without using the network cables. However, you will initially need to connect your system to the router with an Ethernet cable, once the setup is done, you can remove the cable and access the network with your wireless adapter.
If you are a native user and going to set up a wireless router for the first time, then the firstly you should know about the step-by-step procedure. In such a case, either you can contact Netgear phone number to get expert assistance or you can follow up certain easy guide given below.

• Turn your computer and modem off.
• Search the Ethernet cable that connects your modem to your computer. Disconnect it from your system.
• Take the disconnected end and plug it into the Ethernet port on the router backside.
• Connect the Ethernet cable that provides the router into the LAN 1 port on the router backside.
• Attach its other end into the respected port on the system’s backside, this is the same port you disconnect the cable from in Step 2.
• Connect the modem to the power and turn it on. Wait for at least two minutes.
• Connect the router and wait for two minutes.
• Turn the system on and check the lights on the router front-side. The entire lights should be lit. In case, if the third light is blinking or not lit, confirm the connection from the router to the modem, ensuring it is safe and the modem is turned on.
• Browse the internet and enter 192.168.0.1 into the address bar.
• A login window will appear and ask for a username and password.
• Here you need to enter the default router’s settings, type ‘admin’ for username and ‘password’ for the password.
• When the router is connected, a setup wizard will appear. Now, you can complete the final process of configuring your router.

However, if you may get any of the issues or you fail even after completing a few of steps, it is recommended to contact Netgear customer support number listed in the online directory such as ContactforService to search alternate phone number to make a direct contact to the expert for resolving your problems instantly.

Source: https://contactforservice.wordpress.com/2016/05/23/install-netgear-wireless-router-without-cd-dvd/

Unknown Pada 4:03 AM 1 Komentar

How to Set Up a Belkin Wireless Router on a Mac?

How to Set Up a Belkin Wireless Router on a Mac?

belkin customer support number Belkin Router

Set Up a Belkin Wireless Router on a Mac

Setting up a Wi-Fi router on a Mac is a quite different process rather than setting up a router on a PC, with a few modifications in the later steps which want knowledge of the Mac OSX layout. If you are going to the Belkin wireless router setup, then the first things you need to follow the documentation provided by the manufacturer. Thus, you will be able to set it up easily within a short span of time without any hassle. Steps are:

• At first, ensure that the Mac is not currently accessing the internet via the Ethernet cable.
• Disconnect the cable modem from the wall to start the process, and then plug the router to the cable modem.
• Plug the network cable back of the Mac system and connect it into the router port which is labeled either WAN, WLAN, or Internet.
• Connect the cable modem into the power socket backside and let it start. Wait for a few moments.
• Ensure that the Mac computer is turned on as well, for complete initialization.
• Make a temporary Internet connection by connecting to the network cable directly into one of the available ports on the router.
• Check that this port is not related to the WAN, WLAN, or an Internet port described above.
• Launch your browser and enter the specific address provided by the router manufacturer in the address bar. If necessary, then you should enter a password.
• Enter the SSID or network name. It will direct you into the configuration page that occurs next to the password input in the above step. Check the encrypted password of the network selected by you. After that, ‘Apply’ your settings.
• Unplug the network cable from the Mac as to the temporary internet connection of server you established.
• Now, you will be able to configure the wireless router. The Mac wireless card will perform the work.
• Click on the network icon right side, which is the waves’ set placed in the Mac OSX upper right-hand-side.
• Now, you will be able to access your new wireless network connection on your Mac.
• Once you click on the wireless icon, choose the SSID network’s name from the drop-down list, wait a moment, and then enjoy the wire-free internet browsing.

However, if you may experience any of the issues after completing a few of the steps, it is recommended to call on the Belkin Customer Support Number to get your problem to be resolved instantly with the help of an expert. As well, you can search alternate contact number by visiting directories as ContactforService available online to make a direct contact with the specialist without wasting too much waiting time.

Unknown Pada 4:55 AM 2 Komentar

How to Use TurboTax with an LLC Business?

How to Use TurboTax with an LLC Business?

canada software TurboTax usa

TurboTax is income tax preparation software programs used by individual and business owners to calculate tax-filing process for both state and federal levels. This is the no.1 rated tax application guarantee you to get your biggest tax refund within a few days. It provides step-by-step directions for calculating and filing your taxes. It makes simple and easy process for you.

This software also offers a number of programs in different prices range as per your individual financial requirement. In case, you have a simple tax return, select its free version. If you are a home user or have medical expenses, then the TurboTax deluxe version will help you to search the hidden deductions.

If you have rental properties or mutual funds, then select the TurboTax Premier version for multiple returns, while those who are individuals or self-employed, use the TurboTax Home or LLC Business version fits for their requirements.

Steps for How to Use TurboTax With An LLC Business?

This version of software is specially designed for those who have own LLC. Have a look for some instructions to use TurboTax with an LLC Business.

• At first, visit its official website.
• Choose the TurboTax Business that covers Partnerships and Multi-user LLCs.
• Check if the software is the best choice for your business. This is the perfect and much suitable for multi-user, LLC’s with revenues of fewer than $250,000 and less than five employees.
• Enter all the information related to your LLC, as your address and employees’ number. The program will walk you via the procedure of reporting both earnings and expenses. particularly for an LLC.
• Produce the copies and e-file via file or Turbo Tax your return via the IRS in the mail when completed.

However, if you are getting problems to calculate your tax, then it is recommended to contact at the TurboTax Customer Service Number to get expert assistance that helps you to use TurboTax for business success.

Unknown Pada 5:30 AM Komentar

Connect a Wireless Keyboard to a Gateway Computer

Connect a Wireless Keyboard to a Gateway Computer

Gateway Computer Support

In the era of computer technology, the use of wireless peripheral devices as keyboards and mice are increasing day by day. Such types of device overcome the hassles of extra cables that can restrict you within a limited region and movement. Although a number of manufacturers available that’s compatible with wireless devices and even produce their own wireless keyboards and mice, but Gateway is known for their quality products and its wireless keyboards are easy to install yet compatible with different devices and operating systems.

Here are some easy steps that help you to get connected your Gateway computer with a Wireless Keyboard:

• Acquire a Gateway wireless keyboard and make sure that the software program that accompanies it is compatible with your operating system or not.
• Install the relevant software onto your system, which comes with your keyboard. Follow up the installation wizard instructions step by step to configure the installation properly to your system.
• Connect the receiver that comes with the Keyboard into a USB port on your system. It acts as the invisible link between the system and keyboard; it eliminates the requirement of physical wire.
• To get the best possible results, connect the receiver back into a USB port placed on the system front side.
• Connect the batteries into your batteries. Normally, you need to use in between two and four AA batteries for wireless devices.
• Activate your keyboard. You will get an informational bubble as a pop up on your system screen, which indicates about new hardware devices have been detected.
• Once you get the message that all devices have been correctly installed and running properly, you can start to use your keyboard.

If in case, you are getting problems to make a proper connection in between your computer and keyboard, it is advisable that you need to get expert help by dialing Gateway Customer Support Number. However, if the dialed number is not responding and going busy since long time, feel free to visit online directory ConactforService to search alternate contact number for immediate problem resolution.

Unknown Pada 5:08 AM Komentar

Handy Steps to Configure Cisco Router with Firewall

Cisco Wireless Router

Handy Steps to Configure Cisco Router with Firewall

Although the configuration process of a Cisco router with a firewall is the same as the configuration of a router without a firewall, but the router with a software-integrated firewall provides the best security features of the networking industry. It improves the insertion of security-based commands that hamper access over the external interfaces.

In the other case, configuration is the challenging tasks for those who are not so much familiar with CLI (Cisco Command Line Interface) and CIOS (Cisco Internetwork Operating System). So, the Cisco router configuration for both custom and standard should only be stabbed by a certified network administrator. Steps are:

• At the admin workstation, try to install the terminal emulation software; generally, this is placed on the installation CD of the router.
• Connect the router to the available serial COM port of workstation via the RS-232 serial-cable.
• Launch the terminal emulation software. Turn on the router; the first boot sequence will start. If your router was configured earlier, then a prompt will visualize as ‘hostname’, otherwise, for a non-configured router it says the ‘Router’.
• Give an Initial command-line by typing ‘en’ or ‘enable’ and hit ‘Enter’. You will get a password prompt. Type your password so that switch you to restricted mode. The command prompt will modify to the ‘Router#’.
• Type the ‘conf t’. Hit the “Enter”. It will lead you in the global configuration mode. It will change to the ‘Router (config) #’.
• Verify that if your current router is prepared with IOS Firewall by entering ‘IP inspect?’ Hit the ‘Enter’. In case, the router includes the IOS firewall, you will get the commands list, which is particularly established for firewall configuration, otherwise, you will get ‘% Unrecognized Command’.
• If you want to configure exact interfaces, so that prevent access and network traffic, enter ‘interface [NAME]’. Click on the ‘Enter’. The Command prompt modifies to the ‘Router (config-if) #’.
• Start entering new configuration of your router. Hit ‘Enter’ after each and every command line entry. Recognize for the Firewall configuration which one is best for your network requirements.
• Once you type all configuration commands, enter ‘CNTL/Z’ and hit ‘Enter’, so that you return in the command line to restricted mode.
• Enter ‘show IP route’ or ‘show IP arp’ and hit ‘Enter’. You will get the complete IP addresses list of the available networks, notifying your router is configured accurately.
• On the command prompt, enter ‘show running-config’ and hit ‘Enter’. You will see the new running configuration.
• Save the router’s new configuration. Enter ‘copy running-config startup-config’ and hit ‘Enter’. It will copy your current configuration to your new configuration, and save it into the memory of the router.

However, if you have any queries regarding the above listed steps, feel free to avail the ContactforService to find trusted Cisco Router customer support number to get your queries to be resolved immediately.

Unknown Pada 5:04 AM 1 Komentar

Setting Up Belkin N300 Wireless Router With Ease!

Setting Up Belkin N300 Wireless Router With Ease!

Belkin Router

Are you getting problems to install and setup your recently purchased Belkin N300 Wireless Router recently? Don’t worry! Here are some easy steps that you need to follow up in order to make a connection between your computer and the Internet. Have a look for below listed steps:

• Plug the router cable to the power. Press and hold the reset button around 10 seconds. The lights will start to blink. After one minute, unplug the router cable. It will help you to reset the router to the default settings if something went wrong earlier.
• Disconnect the Ethernet cable from your system and plug it into one router port from the available ports and then connect its one end to the computer.
• Open your web browser and type 192.168.2.1 in the search bar and click Enter. It will direct you the login page, here you need to enter the username and password in their respected field. Click on the Enter button.
• It will prompt you on the configuration page. Here, you find a number of settings, but you need to change only a few of them to get everything functioning and to make your secure network connection.
• The first thing you need to search the wireless setup section on the configuration page. Enter the SSID name and leave that all the settings default. After that, click the Save button. Now, you need to setup the security settings. Fix the security type to WEP and set the passwords. Now, hit on the save button to process further.
• 6. Search the login password related to the settings part of configuration page. Type the same phone number for the password. As well, you can also create a username. Enter an admin if you have otherwise left it blank. Click on the Apply button to log into the router.
• Disconnect the power cable from the modem and router. Plug the Ethernet cable to the router LAN port for the modem. If you are connecting wirelessly with a system, then unplug it. Connect the power cable to the modem and the router and hold until it starts up.
• In case, you want to connect it wirelessly, then try to find the wireless connection utility. Hit on it and choose one of them from the available connections, hit on it and then hit OK or connect button. Enter your password, and get a secure network connection smoothly.

However, if you are still suffering from a number of technical problems, it is recommended to call on the Belkin Customer Care Number to get assistance from the professionals for setting the Belkin N300 Wireless Router up easily.

Source: http://contactforservice.kinja.com/how-to-setup-belkin-n300-wireless-router-1774865046

Unknown Pada 2:59 AM Komentar

How To Find and Install Canon Printer Drivers

How To Find and Install Canon Printer Drivers

Canon Printer

Canon Printer Drivers Installation

If you are experiencing problems during a Canon printer installation, or are unable to use an added printer, it is recommended to install or update the printer driver in order to make it compatible with the Windows version you are having. Some driver software are pre-installed in Windows, are found via Windows Update, or are saved on your system via the hardware setup process and so are ready to set up.

Sometimes, you need to install drivers through a CD or DVD offered by the Canon manufacturer and comes with while you purchase the printer. If in case, the required driver doesn’t save already on your system or you don’t have any CDs or DVDs, you should navigate its official sites over the web to find and install the Canon printer drivers from there. For settings these drivers up, you need to follow up some simple steps through the wizard instructions.

Install or Update Printer Drivers using the CD or DVD

• At first, visit the “Start” button, click on the “Control Panel”, click on the “Hardware and Sound”, and then hit the “Printers” to open the printers up.
• Do the printer’s right-click for which you want a new driver, hit the “Run as administrator” option, and then hit the “Properties”. The Administrator permission is necessary for prompting an administrator password or confirmation, enter the password or give the confirmation.
• Hit the “Advanced” tab.
• Hit the “New Driver” option, and then execute the steps in the “Add Printer Driver Wizard”.

Download and Install printer Drivers without the CD or DVD

If you don’t have any CDs, then you can download the compatible drivers’ software from its official website, firstly check which Windows version you are having, and then look for compatible drivers.

• Firstly, visit the “Start” button, hit on the All Programs>Accessories>System Tools, and then hit on the “System Information” option for accessing the information related your PC.
• Hit on the “System Summery” option and then analysis the “System Type” and the “OS Name” to search out which version of Windows you are having.
• Visit to the manufacturer website of the printer and look for a printer driver which is compatible with the Windows version.
• Follow up the proper instructions to download and install it properly.

However, if you still face problems because of some technical failure, or are unable to understand such instructions, then you can make a call at the Canon phone number to get expert assistance for installing the Canon printer drivers properly.

Unknown Pada 2:36 AM Komentar