Are you getting problems to install and setup your recently purchased Belkin N300 Wireless Router recently? Don’t worry! Here are some easy steps that you need to follow up in order to make a connection between your computer and the Internet. Have a look for below listed steps:
- Plug the router cable to the power. Press and hold the reset button around 10 seconds. The lights will start to blink. After one minute, unplug the router cable. It will help you to reset the router to the default settings if something went wrong earlier.
- Disconnect the Ethernet cable from your system and plug it into one router port from the available ports and then connect its one end to the computer.
- Open your web browser and type 192.168.2.1 in the search bar and click Enter. It will direct you the login page, here you need to enter the username and password in their respected field. Click on the Enter button.
- It will prompt you on the configuration page. Here, you find a number of settings, but you need to change only a few of them to get everything functioning and to make your secure network connection.
- The first thing you need to search the wireless setup section on the configuration page. Enter the SSID name and leave that all the settings default. After that, click the Save button. Now, you need to setup the security settings. Fix the security type to WEP and set the passwords. Now, hit on the save button to process further.
- 6. Search the login password related to the settings part of configuration page. Type the same phone number for the password. As well, you can also create a username. Enter an admin if you have otherwise left it blank. Click on the Apply button to log into the router.
- Disconnect the power cable from the modem and router. Plug the Ethernet cable to the router LAN port for the modem. If you are connecting wirelessly with a system, then unplug it. Connect the power cable to the modem and the router and hold until it starts up.
- In case, you want to connect it wirelessly, then try to find the wireless connection utility. Hit on it and choose one of them from the available connections, hit on it and then hit OK or connect button. Enter your password, and get a secure network connection smoothly.
Source: http://contactforservice.kinja.com/how-to-setup-belkin-n300-wireless-router-1774865046
Setting Up Belkin N300 Wireless Router With Ease!
4/
5
Oleh
Unknown
